Csi Etabs 01 Draw General Grid Reference Points Reference Planes In Etabs Part 3

Csi Etabs 01 Draw General Grid Reference Points Reference Planes In Etabs Part 3 Youtube How to draw grid lines in etabs software is shown in this video in detail.use the edit menu )) edit story and grid system data command to modify and in some. Learn how to draw gridlines in etabs#learn etabs#drawgridlines#civil engineering helpcentre.

3 Csi Etabs 01 Draw General Grid Reference Points Csi etabs 01 draw general grid, reference points & reference planes in etabs | part 3 here is the full course on csi etabs essential training series draw dimension lines, draw reference reference points and draw reference planes. Click the draw menu > draw reference planes command. the properties of object form will display in the lower left hand corner of the etabs window. on the properties of object form, enter a value in the vertical offset z edit box to specify the location of the reference plane. if more than one coordinate system has been defined in the model, the. Access the reference planes form as follows: method 1: click the file menu > new model command to display the new model quick templates form. select the custom grid spacing option. click the edit grid data button to display the grid system data form. click the reference planes button in the click to modify show area of the form. Click the draw menu > draw reference points command. the cursor becomes an arrow and the draw reference point mode is enabled. a properties of object form also displays. move the arrow to the desired location and click the left mouse button. alternately, specify values for plan offset x and plan offset y in the properties of object form to.

Draw General Grid Reference Points Reference Planes In Access the reference planes form as follows: method 1: click the file menu > new model command to display the new model quick templates form. select the custom grid spacing option. click the edit grid data button to display the grid system data form. click the reference planes button in the click to modify show area of the form. Click the draw menu > draw reference points command. the cursor becomes an arrow and the draw reference point mode is enabled. a properties of object form also displays. move the arrow to the desired location and click the left mouse button. alternately, specify values for plan offset x and plan offset y in the properties of object form to. Content of this video tutorial is how to create or delete reference planes in etabs#ntdung #etabs #etabstutorial. The edit story and grid system data dialog box will then display. click on “add new grid system”. then to change the grids within that grid system, navigate to that grid in the previous dialog box and press “modify show grid system”. but there are more options available to set up grids in etabs.

Tutorials Etabs Draw Grid Draw Dimension Draw Reference Point Content of this video tutorial is how to create or delete reference planes in etabs#ntdung #etabs #etabstutorial. The edit story and grid system data dialog box will then display. click on “add new grid system”. then to change the grids within that grid system, navigate to that grid in the previous dialog box and press “modify show grid system”. but there are more options available to set up grids in etabs.