Line Inclined To Both The Planes Case 1 Engineering Dra You can join us by sign up by clicking on this link. channel uccqgtvgzgww8mfx5kythckw sponsor#engineeringdrawing #projectionoflines. Engineering drawing projection of straight line inclined to both planes, by subhodaya, line inclined to h.p and v.p, engineering graphics, e.d video lectures.
The Line Is Inclined To Both The Reference Plane Problem 1 Engineer 1. a line ab measuring 80 mm long is inclined at an angle of 30o to hp and 45o to vp. the point a is 20 mm above hp and 30 mm in front of vp. draw the proje. Draw the horizontal locus lines through b 2, and. b. 6. with center a and radius ab1, draw an arc to cut the locus line drawn through b2 at b. connect ab, the top view of the line ab. 7. with center a' and radius a'b. 2 , draw an arc to cut the locus line drawn through connect a'b', the front view of the line. 1 1. connect ab which will be the auxiliary top view. since the top view of the line appears inclined to vp at 600, draw the x 2y line inclined at 600 to the auxiliary top view ab at any convenient. 2. distance from it. draw the projections from a and b perpendicular to x 2y and on them step off 5a’ = 3a ’ and 6b’=4b ’. To solve the problem: 1) draw the top view parallel to the xy line since in that case the front view will show the true length. 2) extend the top view to determine the true length of 75mm. 3) use trapezoidal method to determine the inclinations of the line with the principal planes as 30 degrees with the horizontal plane and 48 degrees with the.
Comments are closed.