Keep Cool And Add Brap How To Setup Factory B Pipe And Run Dual Cooling On A How to video for setting up a factory b pipe wetpipe and how to run dual cooling on a personal water craftthanks for watching. please subscribe to our chan. Hi everyone, i have a rn sj with a b pipe and ada head (dual cooling lines out of head). i was wondering what the correct routting for my cooling lines would be. i allso have a jetworks flow control valve i would like to install. i would like to run dual pissers. this is a list of mods that are on the ski 62t unported 760 ada girdled head, 35cc.
B Pipe Dual Cooling Youtube Location. destin, fl. may 29, 2013. #2. before you put pipe on check manifold for 1 or 2 inlets. if it only has 1, add the second one before installation. you will need to tap a new hole with a 1 8 npt tap. it will allow more even water in, and help for future mods. 12 22 2005, 03:08 pm. re: routing dual cooling with b pipe. both feeds to the manifold. take one of the water feeds of head to bottom of header pipe. then dump that over board. on the dump line take a t to the stinger. the other water outlet of the head gets dumped straight over board. waxracingproducts . Went through installation info for the b pipe, dual cooling install and bypass instructions from protec and this is what i think is one of the best set ups b c (imo): if a line gets clogged both the cylinders and head pipe still get water from 1 line and it should easily keep them cool enough. warms the water before it hits head pipe. Re: dual cooling. all the dual cooling i have seen they have both lines to the exhuast manifold then drill and tap one line from the cyl head straight to a pisser. that is what gets more flow though the jug. then the stock port still from the cyl head to the header with a t to a pisser between the head and header to dry out pipe.
Comments are closed.